Torque wrenches

HYTEM torque wrenches are laboratory quality and accurate tools. They are used to properly install or disassemble a wide range of coaxial connectors.

There are designed with a preset torque value and made with durable and rugged material. To determine which torque wrenche is the right for your application you must know wrench size and preset torque (depending on your coaxial connector).

There are three different design of torque wrenches

 

• Screwdriver type

 

 

• – Break-over type

 

 

• Click type.

 

Part number	Type	Suitable connectors	Wrench size (in)	Preset torque (in-lbs)
11.01.162	Screwdriver	SMA, 3.5mm, 2.92mm, 2.4mm	5/16 (8 mm)	8 (0.9 Nm)
11.01.163	Screwdriver	SSMC	5/32	2
11.01.164	Break-over	1.0mm	15/64	4
11.01.165	Break-over	SMC	15/64	3
11.01.166	Break-over	SSMC	5/32	2
11.01.167	Break-over	TNC	5/8	12
11.01.168	Break-over	TNC	9/16	12
11.01.66	Break-over	SMA, 3.5mm, 2.92mm, 2.4mm	5/16 (8 mm)	8 (0.9 Nm)
11.01.169	Break-over	SSMA	1/4	5
11.01.170	Break-over	N, 7mm	3/4 (19 mm)	14
11.01.171	Break-over	N	25/32 (20 mm)	14
11.01.172	Break-over	N, SC	13/16	14
11.01.173	Click	HN	7/8	16
11.01.101	Click	SMA, 3.5mm, 2.92mm, 2.4mm	5/16 (8 mm)	8 (0.9 Nm)
11.01.174	Click	SSMA	1/4	5
11.01.175	Click	SMC	1/4	3
11.01.176	Click	SSMC	5/32	2
11.01.99	Click	7/16 DIN	27 mm	221 (25 Nm)
11.01.96	Click	7/16 DIN	32 mm	221 (25 Nm)
11.01.95	Click	N	3/4 (19 mm)	13
11.01.177	Click	N	18 mm	13
11.01.178	Click	N	25/32 (20 mm)	13
11.01.179	Click	TNC	5/8	13
11.01.180	Click	TNC	9/16	13
11.01.181	Click	7mm	3/4	12
11.01.182	Click	1.0mm	5/16 (8 mm)	4
11.01.183	Click	4.1/9.5 MIN DIN	22 mm	90 (10 Nm)